Turbo-Wash

The Turbowash replaces the pre-washing tank of the first-generation washing plants. The machine is designed according to the principles of a horizontal centrifuge and includes a combination of washing and a subsequent initial drying action. It is therefore possible to process very dirty pre-shredded material with high paper content and Aluminum foil residues. The Turbowash also improves the recovery rate of the Sink Float Tank.

Turbowash Group for film 2 t/h Input Rotor interchangeable anti-wear plates (factory photo)

On top of the inlet of the Turbowash a small cleansing vessel is installed with a high water through-flow of about 200 l/min, which eliminates pieces of metal, stones and other lumps. 

The  Turbo-Wash is designed for special ruggedness (weight of the rotor about  2 t., total weight about  6 t.) and high reliability. The washing- (addition of clean water) and drying effect is caused by the high centrifugal force (1800 U/min), the impact of the rotor blades and the mutual friction of the rotating plastic material. At the same time, paper and cellulose is separated from the plastic material and is eliminated with the process water. This content can be up to  40% (e.g. for the treatment of industrial waste).

Video shows separation of Cellulose of Rejects with Turbowash and Dynamic Centrifuge 

Design:

  • Dynamically balanced rotor and blades
  • Interchangeable Blades of Al-pressure-cast, with abrasion resistant plates bolted to the blades
  • Oil-cooled roller bearings
  • Easy disassembly with mounted rotor blades
  • Water in closed loop

 Technical Data:

Installed power 75 [kW]
Length/Width/Height 3000 /1850 / 1830 [mm]
Production (dep. on material) 800-1200 [kg/h] Film, 2000 [kg/h] rigid material
Washing water 150 [lit./min]
Cooling water 13 [lit./min]

OCI GmbH
Baarerstrasse 95, CH 6301 Zug, Schweiz
GF: Hubert v. Navarini, Dipl. Ing.
Tel +41 81 3531685 / Fax +41 81 3535109
navarini@navarini.com
Officine Meccaniche Costarelli s.r.l., Perugia (I)

return to Homepage

New: Complete recycling plant with 3rd generation concept

                                                                                       

  

 

OCI GmbH
Baarerstrasse 95, CH 6301 Zug, Schweiz
GF: Hubert v. Navarini, Dipl. Ing.
Tel +41 81 3531685 / Fax +41 81 3535109
navarini@navarini.com
Officine Meccaniche Costarelli s.r.l., Perugia (I)

 

return to Homepage

New: Complete recycling plant with 3rd generation concept